MAGEE Scientific AE33 - Connecting to External Datalogger or PC

Aethalometer
Model AE33
____________________________________________________________________________________________________________
User's manual – Ver. 1.53 July 2015 52/75
5.4 Connecting to External Datalogger or PC
Connect with a crossover cable (or standard serial cable with null modem adapter) from the
PC / Datalogger to the serial port of the instrument on the rear panel.
Establish communications using the following values:
BaudRate = 115200
DataBits = 8
StopBits = IO.Ports.StopBits.One
Parity = IO.Ports.Parity.None
Handshake = IO.Ports.Handshake.None
DtrEnable = True
RtsEnable = True
Note: all protocols including BH and Qair are using connection parameters above.