____________________________________________________________________________________________________________
User's manual – Ver. 1.53 July 2015 62/75
5.9 Screen saver
Screen saver settings (Operation/Advanced screen):
- ON: Screen is always switched on
- Saver: After 60 minutes without user interaction the screen saver is started – Instrument
status flag (Green = measurement, Yellow = warning status, Red = not measuring) is displayed.
- Auto OFF: After 60 minutes without user interaction screen is switched off. Instrument
operation is shown by LEDs on the right side of the screen.
Screen saver is switched off by touching the screen.
To Next Page
Loading...