____________________________________________________________________________________________________________
User's manual – Ver. 1.53 July 2015 61/75
Settings
- display of BB on the home screen is enabled by selecting Home display/procBB setting on
Operation/Advanced tab.
- the algorithm can be fine-tuned by changing the value of Ångström exponents α
ff
and α
bb
,
from the default values of α
ff
=1 and α
bb
=2.
- The calculated values are limited to the 0-100% range
Presentation
- BC and portion of biomass burning (%) are displayed on the Home tab.
- The percentage of BC created by biomass burning is stored in data file - column BB (%).
Reference
Sandradewi, J. et al. (2008), Using Aerosol Light Absorption Measurements for the Quantitative Determination of
Wood Burning and Traffic Emission Contributions to Particulate Matter, Environ. Sci. Technol. 42, 3316–3323.
To Next Page
Loading...