Get Started.
6. Mount the TRX7 in Your Vehicle.
1. Clean the area on the windshield where you want to mount the device. Allow the
surface to dry.
2. Attach the mount baseplate to the cradle with the included screws.
3. Attach the mount to the vehicle.*
4. Plug the device into your Vehicle Power Outlet using the Vehicle Power Adapter
(VPA) supplied with your TRX7. Please use ONLY the supplied VPA.
*RAM suction and U-Bolt mounts both require additional assembly.
Note: Go to trxsupport.magellangps.com for articles and videos about setting up and operating your TRX7, and get in
touch with our Magellan TRX Support team via email at trxsupport@magellangps.com or by calling 800-707-9971.
To Next Page
Loading...
