Get Started.
8
1. Turn On Your TRX7.
Press the Power button on the right side of the device to turn the device on.
2. Connect to Wi-Fi.
1. Tap > > from the Home screen.
2. Slide On/Off button to .
3. Tap again to see networks.
4. Enter password (if applicable) > tap .
3. Update Software + Maps.
IMPORTANT: Go to trxsupport.magellangps.com and look up the latest software and
system versions before downloading any software or system updates.
Your TRX7 will alert you when a software update is available from Magellan GPS.
Note: Wi-Fi must be ON and internet connection must be good to complete updates.
To update the TRX software:
1. Tap from the TRX Dashboard > tap Software Update.
Note: If this option is grayed out, but you know that a software update is available, turn your unit off and on again, then
return to the Settings menu.
2. Tap Download. Wait a few minutes for the update to download.
To Next Page
Loading...
Need help?
General