26 EN26 EN
Because this unit is a combination of HDD and DVD recorder, you must first select which component (output mode)
you wish to operate.
HDD button
DVD button
HDD button
DVD button
Switching HDD / DVD Mode
BEFORE YOU START
1) Press [OPEN/CLOSE A] to open the disc tray.
2) Place the disc on the disc tray with its label side facing up.
Align the disc to
the disc tray guide.
3) Press [OPEN/CLOSE A] to close the disc tray.
It may take a while to load
the disc.
To eject the disc:
Press [OPEN/CLOSE A] to open the disc tray, then remove the disc before turning off the unit.
• When inserting a brand-new DVD+RW/DVD-RW, the unit automatically starts to format.
• If titles have been recorded on the disc, the title list is displayed. Press [STOP C] to exit the title list.
How to Insert a Disc
HDD mode
Press [HDD] to activate the HDD component.
DVD mode
Press [DVD] to activate the DVD component.
E2M01UD_H2160MW9_EN.indd 26E2M01UD_H2160MW9_EN.indd 26 2008/04/15 19:57:432008/04/15 19:57:43
To Next Page
Loading...
Need help?
General
