IMPULSE
®
•G+ Mini Technical Manual
November 2020
Page 9
1.1 Specifications
1.1.1 230V Class
1.1.2 460V Class
1.1.3 Common Specifications
Specification Model Number
2001
2003
2005
2008
2011
2017
2025
2033
2047
2060
Rated Output Current (A) 1.6 3.0 5.0 8.0 11.0 17.5 25.0 33.0 47.0 60.0
Capacity (kVA) 0.6 1.1 1.9 3.0 4.2 6.7 9.5 12.6 17.9 22.9
Specification Model Number
4001
4002
4003
4004
4005
4007
4009
4014
4018
4024
4031
Rated Output Current (A) 1.2 1.8 3.4 4.8 5.5 7.2 9.2 14.8 18.0 24.0 31.0
Capacity (kVA) 0.9 1.4 2.6 3.7 4.2 5.5 7.0 11.3 13.7 18.3 23.6
Specification Specification Value and Information for All Models
Certification UL, cUL, CSA, CE, RoHS
Crane Duty Classification Rated for CMAA Crane Duty Class A-D (or equivalent)
Rated input power supply 3-phase 200–240V or 380–480V; 50/60 Hz
Short Circuit Rating
The VFD is suitable for circuits capable of delivering a maximum of 31,000 RMS
symmetrical Amps.
Control Voltage
120 VAC (50/60 Hz)
42–48 VAC (50/60 Hz)
24 VAC (50/60 Hz)
24 VDC
Allowable input voltage fluctuation +10% or -15% of nominal
Allowable input frequency fluctuation ±5% of nominal
Allowable control frequency fluctuation
±3 Hz of nominal
Control method Fully digital; sine-wave, pulse-width modulated
Maximum output voltage (VAC) Max output voltage 3-phase, 200–240V; 380–480V (proportional to input voltage).
Rated frequency (Hz) 0 to 150 Hz
Output speed control range 40:1 - V/f, 100:1 - Open Loop Vector (OLV)
Output frequency accuracy
0.01%—with digital reference command
0.5%—with analog reference command; 10 bits/10V
Frequency reference resolution Digital: 0.01 Hz; Analog: 1/1000 of max frequency (11 bit and sign bit)
Output frequency resolution 0.01 Hz
Overload capacity 150% of rated output current of the VFD for 1 minute
Remote frequency reference sources 0–10VDC (2kΩ); 4–20mA (250Ω); serial (RS-485)
Accel/decel times 0.0 to 25.5 sec - 1 set; 0.0 to 6000.0 sec - 3 sets; 8 adjustable parameters
Braking torque 150% or more with dynamic braking
To Next Page
Loading...
