MHR Radio Controller Instruction Manual
June 2017
Page 42 of 58
WARNING
MHR RECEIVERS UTILIZING A DIFFERENT POWER SOURCE FROM THE COMPUTER SYSTEM
BEING CONNECTED TO IT CAN HAVE A DIFFERENT GROUND POTENTIAL FROM THE COMPUTER
SYSTEM. DIFFERENT GROUND POTENTIALS WILL DAMAGE EITHER THE COMPUTER SYSTEM OR
THE MHR RECEIVER. AN ISOLATED USB HUB MUST BE UTILIZED TO PREVENT DAMAGE TO THE
MHR, THE COMPUTER SYSTEM BEING CONNECTED TO THE MHR, OR BOTH.
5.4 PROGRAMMING WITH RCP
The Radio Control Programmer (RCP) is a user-friendly, Windows
®
based, interactive radio-
control programmer software. It is designed for communication from your PC to the MHR and
other Magnetek radio control products.
For more information on how to program the MHR with the RCP, please reference the RCP
Users Guide (p/n 178-01702-0010). This guide is available on Magnetek’s website, and can be
ordered from a Magnetek Sales Representative.
To Next Page
