1. PREFACE
Dear customer!
Congratulation to purchasing of this quality inverter welding machine. Please read whole
Operation manual before you start.
NOTE! Items in the manual that require particular attention in order to minimise
damage and personal harm are indicated with this symbol. Read these sections
carefully and follow their instructions.
1.1. Product introduction
MMS welding machine is compact portable pulse MIG-MAG welding inverter suitable for
wide range of usage, for industrial applications as well as for car body repair. Its excellent
MIG welding, Pulsed arc MIG welding, Double pulse arc welding as well as a brazing
characteristics enables to use this device for welding of steel, stainless steel and aluminum
welding and also gives great results in MIG brazing with CuSi3 filler material.
Be aware of danger resulted from welding and follow the safety and fire
instructions.
Never use the device to defrost pipes or charge batteries.
1.2. Assembly requirements
It is necessary to set the device for welding in protection atmosphere on a dry place with the
sufficient area for cooling. The device is designed for use in covered area (under roof).
Never use the device in the rain.
It is necessary to keep the device on a dry place, to protect device against
moisture. It is not advisable to use the device on the open air during rain.
To Next Page
Loading...
