Mahe MMS 2000P - 2-TACT Mode; 4-TACT Mode; Special Features for MIG Welding

24 MMS 2000P
MMS 2400
MMS 3000
EN
4.4. Special features for MIG Welding
4.4.1. 2-TACT mode / 4-TACT mode
2-TACT/4-TACT relates to the function of starting button (trigger) on the welding torch.
Differences in operation of this two modes are shown in following pictures:
t
P
Hot start
level
Welding
Crater fill
level
t
TRIGGER
Crater fill
time
Hot start
time
2-TACT MIG/MAG operation
t
P
Hot start
level
Welding
Crater fill
level
t
TRIGGER
4-TACT MIG/MAG operation