4.2.9. Set up, adjustment and display description
Welding power set up
HyperMIG machines are controlled with full synergic
feature. The welding power is to adjust just with one main
rotary encoder. By set up are simultaneously shown on the
display welding current (in Ampers), wire speed (in
meters/min) and material thickness (in millimeters)
In MMA and TIG mode is only AMP window active.
Arc length correction
Arc length set to 0 –
Arc length set to +30 –
Arc length set to –30 –
Arc length correction is not available in MMA and TIG
welding.
To Next Page
Loading...
