4. Operation
4.1. Turning the device ON
Always use the main switch to turn On and Off the device, never use the power
plug for this purpose!
4.1.1. Power-on sequence
After powered special power on sequence is started on the operating panel, to give the user
information about the firmware.
1. Firmware type (in voltage window)
Em – Front panel EcoMIG
2. A mperage rating (in Ampere window)
200 – 200Amp
3. Firmware revision (in Ampere window) r11 major. Minor revision numbers.
4.2. Operating Panel
4.2.1. Hyper Panel
To Next Page
Loading...
