To Next PageTo Next Page
Need help?Do you have a question about the Mahindra GIPPSAERO GA8-TC 320 and is the answer not in the manual?
General| Model | GA8-TC 320 |
|---|---|
| Horsepower | 320 hp |
| Seating Capacity | 8 |
| Manufacturer | Mahindra |
| Type | Utility aircraft |
| Power Output | 239 kW |
| Maximum Speed | 278 km/h (173 mph, 150 kn) |
| Cruise Speed | 259 km/h (161 mph, 140 knots) |
| Range | 1, 852 km (1, 151 mi, 1, 000 nmi) |
Records all amendments made to the POH, including dates and affected pages.
Lists all effective pages in the manual, their revision dates, and status.
Overview of the handbook's purpose, structure, and scope.
Details the aircraft's airframe, wings, fuselage, and empennage construction.
Defines terms, symbols, and abbreviations used throughout the manual.
Provides conversion factors between metric and imperial units used in the manual.
Introduces the section covering operating limitations, instrument markings, placards.
Lists maximum and normal operating airspeeds and airspeed indicator markings.
Details engine operating limits, temperatures, pressures, and instrument markings.
Specifies maximum aircraft weights and centre of gravity limits.
Covers manoeuvre, load factor, crew, and operation types.
Outlines fuel capacity, passenger limits, other restrictions, and required placards.
Provides basic rules for all aircraft emergencies: control, analyze, land.
Lists recommended airspeeds for various emergency scenarios and glides.
Provides step-by-step checklists for engine failures, fires, and other emergencies.
Elaborates on emergency procedures, including engine failures and system malfunctions.
Introduces normal operating procedures for the aircraft.
Lists recommended airspeeds for take-off, climb, and landing.
Provides checklists for preflight, engine start, taxi, take-off, and landing.
Expands on normal procedures for preflight, engine, taxi, and take-off.
Explains how performance data is presented and its use in flight planning.
Details take-off distance charts based on various conditions and power settings.
Provides data for scheduled climb rates under different conditions.
Presents landing distance charts for power-assisted and power-off approaches.
Lists indicated airspeeds (KIAS) versus calibrated airspeeds (KCAS) for different flap settings.
Shows stall speeds in various bank angles and flap configurations.
Provides glide performance data including best glide speed and landing speed.
Details cruise performance at different power settings, altitudes, and temperatures.
Introduces empty weight and procedures for weight and balance calculations.
Outlines aircraft weighing procedures and records.
Explains how to use loading charts for weight and CG compliance.
Details areas for cargo, load limits, and restraint procedures.
Lists standard, optional, and operational equipment with weights and arms.
Overview of aircraft systems and their descriptions.
Describes aircraft construction and operation of flight control surfaces.
Details cockpit instruments, avionics, and related systems.
Provides details on the Lycoming TIO-540-AH1A engine, its ratings, and operation.
Details the fuel system components, tanks, pumps, and warning lights.
Describes the dual bus electrical system, battery, alternator, and circuit protection.
Explains pitot-static system, instruments, and stall warning system.
Overview of handling, servicing, and maintenance procedures.
Covers mandatory and recommended maintenance requirements.
Procedures for maneuvering, parking, and securing the aircraft.
Details procedures for aircraft service including fluids.
Covers inspection and maintenance of tyres, brakes, and air filter.
Explains the purpose and use of supplements in the POH.
Lists and provides space for logging approved supplements for the aircraft.
