Maico easyTone - Page 27

Operation Manual easyTone
8529689 Rev. 2
25
10/05/2022
5.5.2 Creating a New Protocol or Changing a Protocol
You can create your own protocols according to your screening guidelines and modify
them later if needed.
Press:
to open the New Protocol screen OR
and Edit
to enter the Edit Protocol screen.
Protocol wizard will start and leads you through protocol options (e.g., Figure 8, single
steps: Figure 9 to Figure 14).
Figure 8
Enter a Name for the protocol using the
built-in keyboard (Figure 9). Press to
proceed.
Select/deselect the frequencies (Figure 10).
Press to proceed.
Figure 9
Figure 10
Back
Next
Task
Step