easyTymp® Operating Manual
13
4 Operating easyTymp®
4.1 Operating Panel
Function Keys:
- Top buttons: Function of the keys is related to the
functions indicated in the display above the individual
function key. (e.g. Select Test, Patient, Stop …)
Arrow Keys: Turn on easyTymp® by
pressing the right or left arrow key.
Turn off easyTymp® by pressing both keys at the
same time.
Up and Down buttons: Scroll through the different
easyTymp® settings menu, test protocols or up and
down the display.
4.2 Getting started
To get started, take the easyTymp® out of the cradle. In default setting it will turn on
a
utomatically.
If you don’t store the easyTymp® in the cradle, press either red or blue arrow key to switch
the device on.
To switch easyTymp® off, press both red and blue arrow keys together and hold for one
second
easyTymp® will always start within the test screen, ready to start a measurement. It will use
the same protocol as previously used.
To Next Page
Loading...
Need help?
General
