easyTymp® Operating Manual
4
3 Getting started
3.1 PC system requirements
Processor: I
ntel Pentium 4 / Celeron 1,4 GHz
Memory: 1 GB RAM
Graphic display: 1024 x 768
Operating system: Windows XP Professional (mit SP3)
Windows 7, Professional oder Ultimate Version für 32 und 64 Bit
Computer
Connection: USB 1.1 or higher
3.2 Unpacking and inspecting
Check the packaging and content for damage
Thoroughly inspect the exterior of the shipping for any sign of damage or tempering. Should
any damage be noted, please notify the carrier immediately.
If the content box has been damaged during transportation, the instrument should be
checked for any electrical or mechanical defects. Should any defects be identified, please
contact the responsible dealer. Keep all original packaging to facilitate any insurance claims
against the damages.
Keep the original packaging for future shipment!
The easyTymp® is packaged in a specially-designed box. Please keep the box as it will be
useful for sending the instrument for the annual instrument check-up.
Please contact your nearest responsible dealer should the annual instrument check-up be
needed.
Please check that all accessories listed below are received in good condition. If any accessories
are missing or damaged, immediately notify your MAICO Special Instrument Distributor
Probe 721-2
Rechargeable Battery Pack 721-4
Software CD 1156-2075
easyTymp® handheld unit 721-1
Probe Tip 721-3
Eartip Kit 721-5
Instruction Manual 1162-1100
Calibration Cavity 721-7
Power Supply (Handheld Unit)** 721-6
Power Supply (Cradle)** 721-9
USB Cable for Handheld* 1025-2097
USB Cable for Cradle* 1025-2092
*Will contain only one, depending on configuration ordered.
** Will contain only one, depending on configuration ordered.