easyTymp® Operating Manual
16
Operating from this screen:
Putting the probe in an ear will automatically start the test.
Top left button will bring you into the Select Test screen from where you can select a
different test protocol.
Top middle button will bring you to the Patient screen from where patient data can be
viewed and changed and earlier sessions can be reviewed and/or printed.
Top right button will interrupt the test (Stop) and bring you to the Done! screen.
Right and Left buttons will select respectively right or left ear for testing.
If data on one or both ears is still available, the Up and Down buttons will bring you back to
the done screen and allow you scroll through the measurement results.
To Next Page
Loading...
