Maico MA 41 - Setup Date and Time

Operation Manual MA 41
8100456 Rev.9
36
01/16
These menu items are available (Bold represents default setting):
Frequency Settings
Frequency
Default Frequency Set (On/Off):
Set default frequency if side,
transducer or signal type has
changed
Frequency Roll
Back: Frequency control jumps
to 1,000 Hz if the highest and
lowest frequency was reached
Stop: Frequency control
function stops at highest and
lowest frequency
Wrap: Jumps to the
lowest/highest frequency when
the highest/lowest frequency
Standard
Frequencies
Select/deselect
Level
Default Level
On/Off: Set default level after
changing signal type
Level Steps
5; 2; 1
Inverse Dialing
Change effect on dialing an
encoder: Dial Down
Speech Level Unit
dBSPL/dBHL: Select the level
unit for speech signals