Appendix C: EMC Compatibility
Portable and Mobile RF communications equipment can affect the MAICO
MA41. Install and operate the MAICO MA41 according to the EMC information
presented on this page and the next 4 pages.
The MAICO MA41 has been tested for EMC emissions and immunity as a
standalone instrument. Do not use the MAICO MA41 adjacent to or stacked
with other electronic equipment. If adjacent or stacked use is necessary, the
user should verify normal operation in the configuration.
The use of accessories, transducers and cables other than those specified, with
the exception of servicing parts sold by MAICO as replacement parts for internal
components, may result in increased EMISSIONS or decreased IMMUNITY of
the device. Anyone connecting additional equipment is responsible for making
sure the system complies with the IEC 60601-1-2 standard.
Anyone connecting additional equipment is responsible for making sure the
system complies with the IEC 60601-1-2 standard.
Electromagnetic Compatibility
Although the instrument fulfils the relevant EMC
requirements precautions should be taken to avoid
unnecessary exposure to electromagnetic fields, e.g.
from mobile phones, etc. If the device is used adjacent
to other equipment it must be observed that no
mutual disturbance appears.
To Next Page
Loading...
Need help?
General
