Maipu S2000-8/16 10/100Mbps Ethernet Switch User Manual

2011 Maipu Communication Technology Co., Ltd, All Rights Reserved
11
Write MAC address in this place and read/write the configuration value of PHY, MAC,
EEPROM.
2.4 Restore to Default Configuration
Restoring to default configuration means to restore to factory status, not including IP
address, username, and password.
Click (Load Default Setting) under (Administrator) on the left to turn to following page.
Click (load). Reboot the device after modification.
Click (Reboot) to reboot device.
2.5 Firmware Update
It supports following update methods:
1. through web browse
Click (Firmware Update) under (Administrator) on the left to turn to following page:

Maipu S2000-8/16 10/100Mbps Ethernet Switch Specifications

General

Brand	Maipu
Model	S2000-8/16 10/100Mbps Ethernet Switch
Category	Network Router
Language	English