Maipu S2000-8/16 10/100Mbps Ethernet Switch User Manual

2011 Maipu Communication Technology Co., Ltd, All Rights Reserved
7
Chapter 1 Accessing Device
1.1 Accessing Mode
Configure the device through WEB configuration page, including: switch management,
port configuration, and VLAN configuration. Use your web browser (Internet Explorer5.0
or later is recommended) to configure the switch.
1.2 Web Configuration
Each network interface supports WEB management, default administrative IP is
192.168.2.1, mask is 255.255.255.0 and default gateway is 192.168.2.254. PC of the
administrator should connect to the device for administration.
1.3 Log in
Type the IP address http://192.168.2.1 in the location box (PC of the administrator should
connect to the device for administration) and press enter:
Type username in (ID) and password in (Password) before click (OK). Then enter into
configuration page .
Note: Default username is admin and password is admin, which can be modified in
(Authentication Configuration).
The main page as below:

Maipu S2000-8/16 10/100Mbps Ethernet Switch Specifications

General

Brand	Maipu
Model	S2000-8/16 10/100Mbps Ethernet Switch
Category	Network Router
Language	English