MAJORITY OAK-CDAB-WAL - FM Radio; Other Functions FM Radio; Set up of the FM Radio Preset Stations

Instrucons Guide
FM Radio
Press the ‘Mode’ button (Ref.9) multiple times on the
unit and choose “FM” or press the ‘FM/DAB’ button
(Ref.16) on the remote. The rst time you do this, the
FM frequency “87.5 MHz” will be displayed on the
screen.
Fully extend the antenna (Ref.20).
To auto scan, press and release the *‘AMS’ button
(Ref.2) on the remote. This will then start scanning up
the frequency band and play the rst station it nds
with good signal.
The radio will display station information when you
press the ‘Info’ button (Ref.13) on the remote, press
multiple times to view all information. Please see page
20 for further details.
*Automatic Music Scan
FM Scan Setting
Choose between scanning strong and weak signals (All)
or only the stations with strong signal (Only).
Press the ‘Menu’ button (Ref.7) on the remote. To make
your choice, use the ‘Previous/Next’ buttons (Ref.9/22)
to choose your option.
Select “FM Scan Setting” and press the ‘Enter’ button
(Ref.21).
Press the ‘Previous’ (Ref.9) or ‘Next’ (Ref.22) button to
choose between “Strong stations only” or “All Stations”,
press the ‘Enter’ button (Ref.21) to conrm your choice.
To tune a specic frequency manually
To listen to a specic frequency press and hold ‘Next’
(Ref.22) on the remote to search forward quickly and
‘Previous’ (Ref.9) to search back quickly. It will stop
searching when the button is released. To search slowly
press the ‘Next’ (Ref.22) or ‘Previous’ button (Ref.9) on
the remote multiple times rather than holding.
Audio Settings Mono or Stereo
All stereo stations are reproduced in stereo. For weak
stations this can result in poor audio quality. The audio
quality can be improved using mono.
Press the ‘Menu’ button (Ref.7) on the remote. To make
your choice, use the ‘Previous/Next’ buttons (Ref.9/22)
to choose your option.
Choose “Audio Setting” and press the ‘Enter’ button
(Ref.21). Press the ‘Previous’ (Ref.9) or ‘Next’ (Ref.22)
buttons to choose between “Stereo allowed” or “Forced
mono”, press the ‘Enter’ button (Ref.21) to conrm your
choice.
How to store a preset station
Up to 40 stations can be set. To store a station that you
are currently playing:
Press and hold ‘Program’ button (Ref.19) on the
remote for 3 to 5 seconds. “<1: [Empty]” will show on
the display.
Press ‘Previous’ button (Ref.9) or ‘Next’ (Ref.22) to
change the “<1” to the number you want to store the
station as. Then press ‘Enter’ button (Ref.21) on the
remote to save. The display will then show “Preset [1]
stored”.
How to play a preset radio station
Press the ‘Program’ button (Ref.19) on the remote.
Press ‘Previous’ button (Ref.9) or ‘Next’ (Ref.22) to scroll
through your preset stations, up to 10.
Press the ‘Enter’ button (Ref.21) to select your choice.
8