MAJORITY OAK-CDAB-WAL - Other Functions

Other Funcons
Sleep Setting
This enables you to programme the radio to switch o
at a specic time, up to 120 minutes from activation.
In working mode, Press and the ‘’Sleep’ button (Ref.15)
on the remote control.
Choose from: O/15mins/30mins/60mins/90mins or
120mins by pressing the ‘Sleep’ button (Ref.15)
multiple times.
Once seletced, the timer icon will show on the
display screen to show that the timer has begun. To
turn the sleep timer o, follow the above instructions
and choose “O” from the choices.
To view how long is remaining on the timer once it has
been set, press the ‘Sleep’ button (Ref.15) on the
remote and the remaining minutes will be displayed.
Headphone Connection
Connect your headphones to the socket at the rear of
the unit (Ref.17 ). The unit can not support
headphones that have a microphone input, for
example mobile phone headphones.
System Reset
Press the ‘Menu’ button (Ref.7) on the remote control.
Use the ‘Previous’ or ‘Next’ buttons (Ref.9/22) to scroll
to “System” and press the ‘Enter’ button (Ref.21) on the
remote control. Press the ‘Previous’ or ‘Next’ buttons
(Ref.9/22) to scroll to “Factory Reset”, press the ‘Enter’
button (Ref.21).
Use the ‘Next’ button (Ref.22) to choose “Yes” or “No”.
Press the ‘Enter’ button (Ref.21) to conrm.
SW Version – Software Version Display
Press the ‘Menu’ button (Ref.7) on the remote control.
Use the ‘Previous’ or ‘Next’ buttons (Ref.9/22) to scroll
to “System” and press the ‘Enter’ button (Ref.21) on the
remote control.
Then use the ‘Previous’ or ‘Next’ buttons (Ref.9/22) to
scroll to “SW Version”, press the ‘Enter’ button (Ref.21)
on the remote. The software version will be displayed.
Instrucons Guide
14