MAJORITY OAK-CDAB-WAL - CD Player

To choose CD Mode, press through your choices using
the ‘Mode’ button (Ref.9). The choices will be displayed
on the front screen (Ref.2) – select “CD”. Alternatively
press the ‘CD’ button on the remote (Ref.16).
Insert the CD into the CD port at the front of the unit.
The CD will read automatically and start playing.
Press and release the ‘Play/Pause’ button to play/pause
(Ref.21) on the remote.
Press and release the ‘Previous’ (Ref.9) or ‘Next’ (Ref.22)
button to select previous or upcoming tracks.
Press and hold the ‘Previous’ or ‘Next’ button to
rewind or fast forward. Press and release the ‘Stop’
button to stop (Ref.23).
Press and release the eject button (Ref.14) on the
remote to eject the CD.
Whilst the CD is playing, the current track number and
the elapsed time will be displayed.
CD Player
Please note all (Ref.) refer to Page 1 Controls and Functions mapping guide.
Playing Repeatedly
For CDs, press the ‘REPEAT’ button (Ref.3) on the
remote multiple times to view options: Repeat All (ALL),
Current Track (SINGLE) or Repeat O (OFF). Press ‘Enter’
on the remote to conrm your choice.
Random Play
For CDs, Random Play can be set by pressing the
‘RANDOM’ button (Ref.17) on the remote control.
Press the ‘Mode’ button (Ref.9) multiple times on the
unit to switch to DAB Radio. On rst use it will
automatically scan all stations and save them. To select
the mode from the remote press the ‘FM/DAB’ button
(Ref.16).
Fully extend the antenna (Ref.20).
To auto scan, press the ‘Menu’ button (Ref.7) on the
remote and use the ‘Next’ (Ref.22) and ‘Previous’
buttons (Ref.9) to scroll through options. Select “Full
Scan” and press the ‘Enter’ button (Ref.21). This will
start scanning up the frequency band and store all
stations that have a good signal.
The radio will automatically save all the stations with a
strong signal, up to 240 MHz. After searching has
nished it will automatically play the rst station
stored.
Instrucons Guide
9