MAJORITY OAK-CDAB-WAL - Set up of the CD Player Preset Stations

Program tracks into a preselected order
Press the ‘Stop’ button (Ref.23) on the remote, then
press the ‘Program’ button (Ref.19) .
The track number will then ash on the front display
(Ref.2). Change this number to your rst required track
using the number keys on the remote (Ref.12).
Press the ‘Program’ button (Ref.19) to move to preset 2
(P02) to select your next track, select using the number
keys on the remote (Ref.12).
Press the ‘Program’ button (Ref.19) to continuing
adding more tracks or the ‘Play/Pause’ button on the
remote and wait a few seconds for the unit to start
playback of your selection.
Up to 20 tracks can be preselected.
Note: when using playback, the ‘Next’ (Ref.5) and
‘Previous’ (Ref.6) buttons can only be used on the unit,
not on the remote.
Compatible Discs: CD-R, CD-RW and Audio-CD.
Programme tracks into a preselected order
Press the ‘Stop’ button (Ref.23) on the remote, then
press the ‘Program’ button (Ref.19) . The track number
will then ash on the front display (Ref.2). Change this
number to your rst required track using the number
keys on the remote (Ref.12).
Press the ‘Program’ button (Ref.19) to move to preset 2
(P02) to select your next track, select using the number
keys on the remote (Ref.12).
Press the ‘Program’ button (Ref.19) to continuing
adding more tracks or the ‘Play/Pause’ button (Ref.21)
on the remote and wait a few seconds for the unit to
start playback of your selection.
Up to 20 tracks can be preselected.
Note: when using playback, the ‘Next’ and ‘Previous’
buttons can only be used on the unit not on the
remote.
Instrucons Guide
10