MAJORITY PEG-NET-BLK - Basic Operation

7
Controls and Funcons
Basic Operation
Please note that the instructions within this manual will refer to
the radio button number e.g (Ref.*number*) in accordance to
the diagrams on pages 2-3. The remote control can also be used
with the relevant buttons as per the diagram on pages 4-5.
Starting up your internet radio
Plug the adaptor connector into the back of the system labelled
‘DC in’ (Ref.) and turn the power on from the mains. Switch
the button at the back of the radio to ‘ON’ (Ref.) to display a
‘Welcome’ screen.
After the Welcome screen, you will be able to select your chosen
language by scrolling with the Select dial (Ref.). Select your
language by pressing down the Select dial.
If this is the rst time of using your radio, you will get the option
to set up your WiFi to stream Internet Radio with the message
“Would you like to congure network now?”. If you select YES,
your radio will begin to scan for nearby networks to connect to.
If you select NO then you can set this up later in conguration
settings.