MAJORITY Robinson 2IR - Page 16

16
EN
Instructions Guide
Factory Reset
Factory reset would be recommended when experiencing issues with radio
reception, moving houses, moving to a dierent part of the country, when
the Robinson 2IR may pick up the local and national DAB stations in that area,
therefore previously tuned channels may no longer be available.
1. While in System settings mode, press the
12 w
/
s
buttons to select Factory
reset, and press the SELECT button to conrm.
2. Press
7
/
8
buttons to select [Ye s ], and press the SELECT button to conrm
or select [No] to cancel.
After the system reset, all the tuned stations, Internet, DAB & FM preset
stations will be erased.
Software update
1. While in System settings mode, press the
12 w
/
s
buttons to select
Software update and then press the SELECT button to conrm.
2. Press the
12 w
/
s
buttons to select "Auto-check setting" or "Check now",
and then press the SELECT button to conrm.
Before downloading software, ensure that the radio is plugged into a
stable mains power connection.
Interrupting the mains supply during software download can lead to
functional disturbances and/or damage to the unit!
Setup wizard
The setup wizard is available in the System settings section; you can run through
this to congure settings for date/time and network. Once this has nished, your
radio is ready to use.