MAJORITY Robinson 2IR - System Settings

12
EN
Instructions Guide
Connecting using your wireless network password
When using a router with no WPS button, you will be asked to enter your
password to connect your Robinson 2IR with your wireless network. Alternatively,
select SKIP WPS to go straight to password screen.
1. Press
12 w
/
s
/
7
/
8
buttons to select each letter/number of your
password. Press SELECT button to enter the selected letter/number.
2. Once the password has been entered, press
12 w
/
s
/
7
/
8
buttons, to
conrm by selecting OK on the right hand-side of the screen. It takes a few
seconds to connect with your network.
3. After your radio has connected, press SELECT button to exit the setup.
Settings can be changed at any time in Menu-System Settings -
Network - Network wizard
This instruction manual explains the basic instruction for operating this
unit. Unless otherwise stated, all operations described are based on
remote control use.
System Settings
Press MENU button to display the menu. Press
12 w
/
s
buttons to select
System settings and then press SELECT button to conrm.
Equaliser
This system supports a variety of equalizers and sound eects.
- Press the EQ button to access Equaliser menu
Alternatively,
- While in the System settings mode, press the
12 w
/
s
buttons to select
Equaliser and then press the SELECT button to conrm.