6
EN
Battery Replacement for the Remote Control
1. Press down the battery cover at “ ” and
push the battery cover outwards in the
direction of the arrow.
2. Insert 2 x AAA 1.5V alkaline batteries (not
included). Make sure to match the (+) and ( - )
ends of the battery with the (+) and ( - ) ends
indicated in the battery compartment.
3. Close the cover.
Handling the Battery
●
Improper or incorrect use of batteries may cause corrosion or
battery leakage, which could cause re, personal injury or damage to
property.
●
Only use the battery type indicated in this manual.
●
Do not dispose of the used battery as domestic waste. Dispose of it in
accordance with local regulations.
●
Remove the battery from the remote control when not in use for a
long period of time, as corrosion or battery leakage may occur and
result in physical injury, and/or property damage, and/or re.
Instructions Guide
To Next Page
Loading...
