MAJORITY Robinson 2IR - Page 11

11
EN
Instructions Guide
Connecting using the WPS button on your router
Connecting using the WPS (Wi-Fi Protected Setup) button on your router is a
quick and easy way to connect your radio without having to type in a password.
Select one of the following connection methods:
Push WPS Button
●
Press buttons
12 w
/
s
to select the option Push Button. Press SELECT button
to conrm.
●
A message will be displayed on the screen, telling you to press the WPS
button on your router which you need to then press.
Note: Refer to your router user manual to identify the WPS button, if in doubt.
●
Press the SELECT button to conrm. Robinson 2IR will now connect to your
router.
This may take a few seconds.
Pin (code number)
●
Press
12 w
/
s
button to select PIN. Press SELECT button to conrm. The
radio will generate an 8-digit code number, which will be displayed on radio’s
screen.
●
Refer to your router user manual to follow the WPS instructions, when using a
pin code number. Enter this code number into the wireless router to connect
with Robinson 2IR.
●
Press SELECT button to continue.