23
EN
Station List
1. While in DAB mode, press the MENU button to access DAB menu.
2. Press the
12
w
/
s
buttons to select Station list and then press the SELECT
button to conrm.
3. A list of DAB stations will show on the display.
Auto Scan
Press SCAN button on remote control to activate auto scan.
Alternatively,
- Press the MENU button, and then press the
12
w
/
s
buttons to select Scan.
Press the SELECT button to conrm to activate auto scan.
1. The display will show “Scanning…” and a progress slide bar.
2. All the stations that have been found will be stored automatically. To explore
and listen to the found stations, press the
12
w
/
s
buttons to select and
then press the SELECT button to conrm.
Manual Tuning
As well as the auto tune function, you can manually tune the receiver. This can
help you when aligning your aerial or when adding stations that were missed
while auto tuning.
1. Press MENU to display the menu.
2. Press the
12
w
/
s
buttons to select Manual tune, and press the SELECT
button to conrm.
3. The display will show the multiplex 5A to 13F.
4. Press the
12
w
/
s
buttons to select the channel, and press the SELECT
button to conrm.
5. To listen to any stations found, return to the now playing screen and press
12
w
/
s
buttons to select the required station from the station list and press
SELECT button to conrm.
Instructions Guide