MakerBot Replicator Z18 Teardown Guide

1
MakerBot
MakerBot Replicator Z18 Teardown Guide
Tools Needed:
1.3mm Hex Driver
T10 - T20 Torx Driver
Phillips Screw Driver
2.0mm Hex Driver
1.5mm Hex Driver
2.5mm Hex Driver
T10 Security Torx Drive
1 Pair of thin Tweezers
Small Container for Screws
Small Wire Cutters

MakerBot Replicator Z18 Specifications

General

Print technology	Fused Filament Fabrication (FFF)
Printing material	Polylactic acid (PLA)
Layer thickness (min)	0.1 mm
Number of printing colors	-
Maximum build size (WxDxH)	305 x 305 x 457 mm
Filament thickness supported	1.75 mm
Printing compartment volume	42.512 L
Product color	Black
Viewing window	Yes
Model file formats supported	MakerBot, obj, stl, thing
Mac operating systems supported	Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Linux operating systems supported	Fedora 11, Fedora 12, Fedora 13, Fedora 14, Fedora 15, Fedora 6, Fedora 7, Fedora 8, Fedora 9, Ubuntu 10.04, Ubuntu 11.04, Ubuntu 8.04, Ubuntu 8.10, Ubuntu 9.04, Ubuntu 9.10
Windows operating systems supported	Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64
Input current	5.4 - 2.2 A
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	350 W
Card reader integrated	No
Bundled software	MakerBot Desktop
Package depth	719 mm
Package width	650 mm
Package height	1029 mm
Package weight	52000 g
Storage temperature (T-T)	0 - 38 °C
Operating temperature (T-T)	15 - 24 °C

Weight and Dimensions

Depth	565 mm
Width	493 mm
Height	854 mm
Weight	41000 g