To Next Page

To Previous Page

[1] NECESSARY REPAIRING TOOLS

Repair

DescriptionCode No. Use for

Retaining ring S pliers ST-2N

Retaining ring S pliers ST-2

1R003 removing Ring spring 14 and 15 from Tool holder complete for HR2300/

Ring spring 19 from Tool holder for HR2310T

removing Ring spring 21 from Tool holder for HR2310T

Bearing setting pipe 16-8.21R026 assembling Bearing box

1R004

Bearing setting plate 8.21R032 assembling Helical gear 26 for HR2310T

assembling Helical gear 26 for HR2300Bearing setting plate 10.21R033

removing Helical gear 26 for HR2300Bearing setting plate 15.21R035

removing/ assembling Spiro lock washer 30Gear extractor (large)1R045

removing Helical gear 26 for HR2310TBearing setting plate 12.21R034

Tip for retaining ring pliers1R212

Use with 1R003

1/4" Hex. shank bit for M41R228

removing M4 Hex socket head bolt

Ring spring setting tool A1R164 assembling Oil seal 25

Bearing setting pipe 20-12.21R028 assembling Helical gear 26

Pipe 301R232 assembling Oil seal 25

Round bar for arbor 30-1001R252 removing Oil seal 25

V block1R258 assembling Oil seal 25

Bearing extractor1R269 removing Ball bearing 6000LLB / 627DDW

Ring spring 26 setting tool B1R273 removing Cup sleeve / Ball bearing 6806LLU

Round bar for arbor 7-501R281 removing Helical gear 26

Jig for Spiro lock washer

1R369 removing/ assembling Spiro lock washer 30

Ring spring extractor

1R388 removing Ring spring 28

P 6/ 23

CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.

Makita HR2610T Technical Information

Other manuals for Makita HR2610T