Makita LD080PI - Multifunctional endpiece; Timer (automatic release)

Makita LD080PI
Operations
5
EN
Multifunctional endpiece
i
The orientation
of the endpiece
is automatically
detected and
the zero point is
accordingly ad-
justed.
Distance unit setting Tilt unit setting
0.000 m
0.0000 m
0.00 m
0.00 ft
0‘00‘‘ 1/32
0.00 in
0 in 1/32
Switch between the
following units:
2 sec
0.0 °
0.0 %
2 sec
simultaneously
Switch between the
following units:
Timer (automatic release)
s
1
Adjust delay of au-
tomatic release
(max. 60 sec,
standard setting
5sec)
2
i
Once the key is released with the
laser activated, the remaining sec-
onds until the measurement are
displayed in a countdown. The de-
layed release is recommended for
precise aiming e.g. at long distanc-
es. It avoids shaking of the device
when pressing the measurement
key.