During emission tests the equipment was under control of a Mastersizer S
Version 2.11 Software Automated Sequence. This repeatedly measured a known
sample.
For immunity tests the operator checked that the measurement was within the
determined experimental error, and if outside this pre-set tolerance flagged or
noted an error. The susceptibility pass/fail criteria was that the equipment repeats
the measurement within the norm of experimental error.
EMC performance
The equipment under test, when subjected to the following tests was found to be
compliant.
.
Complies with EN50081-2 (1995), generic emission standard (industrial
environments).
.
Complies with EN55022 (1995), class B, radiated and conducted emissions.
.
Complies with EN50082-2 (1995), generic immunity standard (industrial
environments).
.
Complies with EN61000-4-2 (1995), Electrostatic discharge, to severity
level 4, with performance criteria A, ie. no loss of function or performance.
.
Complies with DDENV50140, (1994), Radiated electromagnetic field, to
10V/m, with performance criteria A, ie. no loss of function or performance.
.
Complies with DDENV50204, (1995), Radiated electromagnetic field, to
10V/m, with performance criteria A, ie. no loss of function or performance.
.
Complies with EN61000-4-8 (1995), Fast transient burst, to severity level 4
with performance criteria A, ie. no loss of function or performance.
.
Complies with DDENV54141 (1994), Conducted RF susceptibility, to 10V
with performance criteria A, ie. no loss of function or performance.
APPENDIX G
Getting Started
Page G.2
MAN 0101
To Next Page
Loading...
Need help?
General
