If you are an advanced user you can also customise the report to display the
information to suit you own needs using the Mastersizer Basic language. See the
Malvern Basic Reference manual (MAN 0103) for more information.
$
To print a report
.
To print a report of the view you are currently in select the Print item in
the File menu. When selected the dialogue below will appear.
The dialogue gives you the option to print either one or more from the choice of;
a report, graph, table or a view of the whole screen. If you wish to print a graph
you will have further options on whether the graph is printed on a full page, half
page or third of a page.
Further information on printing is given at the end of this chapter in the section
“Understanding printing”. This section will go into more detail on how to
optimise the print out and how to install and setup a printer. If you are reading
this manual for the first time you may feel that this information will not be of
much benefit at present. If, however, you are experiencing difficulties with
printing you may find this section useful.
Overview of the standard views and
reports
This section describes the contents of the standard views and reports. More detail
on understanding the information is described in the next chapter. For a detailed
description of the Views see the Software Reference manual.
It should be noted that these standard views are there for your convenience. They
have been designed to give a wide choice of common methods of displaying the
result data. You may never have to use some of the views, for example, if you do
ILL 1866
An alternative to using
the
File-Print
menu item
is to select the
Print
button.
NOTE
'
CHAPTER 6
Getting Started
Page 6.4
MAN 0101
To Next Page
Loading...
Need help?
General
