Mamiya DSX - Page 37

K.
Adjusting
the
exposure
meter
at
stopped
down
metering
To make the adjustment for
g
stopped-down
measuring
easy
SBE
—
om971
and
to
increase
durability
(}—om9720)
of Coupling plate assembly.
PB1. 7X6BNi
Adjustment can be done by
turning Nut 1 or Screw 2
Please refer to Page 27 for
Adjusting
the
expossure
meter
at stopped-down metering.
L. Replace CdS for Average
CdS for Average was modified
in June, 1974 due to the
modification of mirror housing
assembly.
So far it was fitted in the
eyepiece frame of mirror housing
3PB1.
7X6BNi
assembly,
but
it
has
been
tightened with 3PBl.7X6BNi Screw.
So remove Screw before replacing
CdS for Average.