General Safety Instructions
19
Carefully read the Assembly Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
2.8 Safety Equipment
The operator must have the following safety equipment in place:
Before the engine is placed into operation, install the emergency-off equipment and connect it into the
safety chain of the system.
Connect the emergency-off equipment so that dangerous situations to people and property are avoided in
case the its power supply is interrupted or is turned back on after an interruption.
The emergency-off equipment must always be freely accessible.
WARNING!
Risk of death caused by non-operational safety equipment!
Safety equipment ensures maximum safety during operation. Even if they may make
working more complicated, they must not be overridden. Safety can only be guaranteed if
the safety equipment is intact and operational.
For this reason:
S Before starting any work, check whether all of the safety equipment is correctly installed
and in good operating order.
S Before starting the engine, check whether all of the safety equipment is correctly installed
and in good operating order.
To Next Page
Loading...
Need help?
General
