Installation
31
Carefully read the Assembly Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
5 Installation
5.1 Prerequisite
Before starting any work read and observe the General Safety Instructions and the safety information in this
chapter.
Strictly observe these instructions and act prudently to avoid accidents, personal injury and property damage.
Personal Protective Equipment
The following protective equipment must be worn:
S Protective Clothing
S Safety Shoes
S Safety Gloves
5.2 Safety Instructions
Personnel
S The installation and commissioning may only be performed by MAN employees or by MAN-trained
qualified personnel.
WARNING!
Danger caused by faulty installation!
Installation requires trained qualified personnel with sufficient experience. Faulty installation
can cause life threatening situations and considerable property damage.
For this reason:
S Installation and commissioning are only to be performed by trained and qualified
personnel.
Ground Rules
WARNING!
Risk of injury caused by improper installation!
Improper installation can case serious injuries or considerable property damage.
For this reason:
S Ensure adequate work space before starting any work.
S Be careful when working with exposed parts with sharp edges.
S Make sure work space is kept clean and orderly!
S Install components in a correct manner.
S Observe the prescribed tightening torques.
S Secure components so that they do not fall or tip over.
S It is absolutely necessary to observe the “Installation Instructions” for the commissioning of a new or
reconditioned engine.
To Next Page
Loading...
Need help?
General
