Identification of the Engine
23
Carefully read the Assembly Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
3 Engine Model Plate
The engines may only be used in accordance with
their use laid down in the planning stage, also see
chapter “General Safety Instructions”, section 2.1.
Therefore, it is important for the plant
manufacturer technician to be able to reliably
identify each engine.
A clear identification is only possible using the
information on the engine model plate.
Engine model plate (1) is installed on the charge
mixture cooler.
MAN Nutzfahrzeuge Aktiengesellschaft
Typ
Motor-Nr. / Engine No.
NI/II
To Next Page
Loading...
