Installation
48
Carefully read the Assembly Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
Tightening torques according to plant standard M 3059
Bolt / nut with Allen or hexagon head with no collar or flange
Thread size
x pitch
Strength classifications / tightening torque in Nm
at 8.8 / 8 at 10.9 / 10 at 12.9 / 12
M4 2.5 4.0 4.5
M5 5.0 8.0 9.0
M6 9.0 13.0 15.0
M7 14.0 20.0 25.0
M8 22.0 30.0 35.0
M8x1 23.0 35.0 40.0
M10 45.0 65.0 75.0
M10x1.25 45.0 67.0 75.0
M10x1 50.0 70.0 85.0
M12 75.0 110.0 125.0
M12x1.5 75.0 115.0 130.0
M12x1.25 80.0 120.0 135.0
M14 115.0 175.0 200.0
M14x1.5 125.0 185.0 215.0
M16 180.0 265.0 310.0
M16x1.5 190.0 280.0 330.0
M18 260.0 365.0 430.0
M18x2 270.0 385.0 450.0
M18x1.5 290.0 405.0 480.0
M20 360.0 515.0 600.0
M20x2 380.0 540.0 630.0
M20x1.5 400.0 565.0 670.0
M22 490.0 700.0 820.0
M22x2 510.0 725.0 860.0
M22x1.5 540.0 750.0 900.0
M24 620.0 890.0 1040.0
M24x2 680.0 960.0 1130.0
M24x1.5 740.0 1030.0 1220.0
To Next Page
Loading...
Need help?
General
