www.mc-techgroup.com ECM | 1.01.00 23
19 SPARE PARTS LIST
Wear, tear and replacement part requirements depend on specific operating conditions.
The recommended quantities are based on experience and they are not binding.
(C) Consumable parts
(R) Recommended spare parts
(S) Spare parts
Recommended quantity being in
operation [years]
ECP-3000 G Jet-Stream heat exchanger
material: Borosilicate glass
connections gas: GL18-6 mm
condensate: GL 25-12 mm
ECP-3000 SS Jet-Stream heat exchanger
material: SS 316
connections gas: G 1/4“i
condensat:e: G 3/8“i
ECP-3000 PV Jet-Stream heat exchanger
material: PVDF (Polyvinylidenfluorid)
connections gas: G 1/4“i
condensate: G 3/8“i
ECM-2G Jet-Stream heat exchanger
material: Borosilicate glass
connections gas: GL18-6 mm
condensate: GL 25-12 mm
ECM-2PV Jet-Stream heat exchanger
material: PVDF (Polyvinylidenfluorid)
connections gas: 6mm tube
condensate: G 3/8“i
ECM-2SS Jet-Stream heat exchanger
material: SS 316
connections gas: 6 mm tube
condensate: G 3/8“i
EC-thermal conductivity paste 50 g (-40 °C to 140 °C [~-40 to 284
°F])
PT-100 temperature sensor for ECM
Cooling unit, complete with compressor, vaporiser
and condensor for ECM
cooling medium: R134A, power: 230 V, 50 Hz
ECM transformer 115 V / 230 V, ... 230 VA
Electronic PID-temperature controller with LED indication, in a front
mounting housing, power 230 / 115 V 50 / 60 Hz.
(C) Consumable parts
(R) Recommended spare parts
(S) Spare parts
Recommended quantity being in
operation [years]
Hose set SR25
with PVDF-tube connectors 4/6 mm, standard
1 set (4 pcs) contact springs SR25 for driver
Contact pulleys SR25 PVDF for driver
Peristaltic pump SR25.2, complete 230 V/115 V, 50 / 60 Hz
Heat peristaltic pump SR25, complete without tube set, motor and
gears