Safety Precautions
M&R Printing Equipment, Inc. - Glen Ellyn, Illinois
3. PRACTICE GOOD HOUSEKEEPING: Maintain and area
adjacent to NOT ON the equipment for tool and color stor-
age. Clean up all spills and eliminate all potential trip points
from the operating areas around the equipment to prevent
slipping or falling into the working zone of the equipment.
Do not stand on equipment elements not intended for
this purpose. Maintain a maximum clear area around the
equipment for unobstructed movement of the Operator.
Perform Preventative Maintenance at the intervals specified
in this Operator’s Manual.
4. AVOID WEARING LOOSE CLOTHING , long hair, neck
ties etc., when operating this equipment as these can easi-
ly become entangled in moving parts. Safety shoes are like-
wise recommended. Avoid horseplay around the equip-
ment.
5. DO NOT ATTEMPT to operate this equipment if you are
sick, excessively fatigued or under the influence of alcohol
or prescription drugs. Shut off the equipment immediately if
any malfunction occurs or appears imminent. Report any
unsafe equipment or condition promptly in order that cor-
rection can be made as soon as possible.
6. BY-STANDERS should stay well away from the equip-
ment so as not to distract the operator or accidentally move
a control element. Avoid talking to the operator while the
equipment is in operation.
7. WHEN CHANGING SET-UP, performing maintenance
work, cleaning the equipment etc., it is imperative that the
main electrical and pneumatic power supplies be discon-
nected to avoid accidental operation and possible resultant
injury. This is particularly important in the event more than
one person is involved in such duties.
8. A WRITTEN SAFETY PROGRAM should be installed by
all companies owning M&R Printing Equipment. This pro-
gram should cover inspection, maintenance and safety
training on the proper use of the machinery.
WARNING! DO NOT WORK
WITHIN THE INDEX TABLE
OPERATING AREA UNLESS ALL
SAFETY PRECAUTIONS HAVE
BEEN OBSERVED!
4
WARNING!
To Next Page
Loading...
