E 300 Operator Interface
M&R Printing Equipment, Inc. - Glen Ellyn, Illinois
49
The next sub-menu item after “Revolver Mode” is
“Rotation” CCW/CW”. This sub-menu item permits
the system Operator to select either counterclock-
wise rotation of the index carousel, or clockwise
rotation of the index carousel.
To change the indication, use the “ARROW” keys to
place the flashing cursor under the “CCW” or “CW”
indication, press the “ENTER” key, then press the
“Reset” push button. When the indication is select-
ed for CCW, counterclockwise rotation, the green
L.E.D. at the top of the control panel will illuminate.
When CW clockwise rotation is selected, the L.E.D.
displays a red indication.
The next sub-menu item is “INDEX SINGLE/DOU-
BLE”. This menu item provides the system Operator
with a means to select either “SINGLE” index oper-
ation, or “DOUBLE” index rotation. To select “SIN-
GLE” index rotation, use the arrow keys to place the
flashing cursor under the letter “D” in the word
“DOUBLE”, then press the “ENTER” key one time.
The next menu item is “SKIP”. This menu item per-
mits selection of either “No T-Shirt Sensor” or
“FOOT PEDAL/PUSH BUTTON” operation. To
select either function, use the arrow keys to place
the flashing cursor on either the letter “N” in “NO”,
or the letter “F” in the word “FOOT” and press the
“ENTER” key. (See Figure 9 above)
Pallets Size:
The next sub-menu in the listing under “OPTIONS”
is “Pallets Size”. Use the arrow keys to select either
“Small”, “Normal” or “Large”, then press the
“ENTER” key.
Flash:
The next menu item in the “OPTIONS” menu is
“FLASH”. This menu item provides a visual indica-
tion which alerts the system Operator as to which
print heads are currently selected for “Flash Cure”
operation. Print heads are displayed from the left to
the right of the display screen starting with the high-
est number print head. Displayed below each print
head you will note either a “-“ indicating that print
Figure 9
OPTIONS
>Revolver Mode
Rotation : CCW/CW
Index : Single/Double
Skip : Foot Pedal/Push Button
Pallets Size :
TIMERS
nozzle TESTS MPR Pg Dwn Pg Up
To Next Page
Loading...
