2120
Note: The photographing interval setting must be longer than the
stop time and less than the panning or the tilting rotation time.
Method 2:
Set the Motion-timelapse mode parameters by entering the Motion Timelapse
interface on screen. Operate with joystick to set up time setting parameter on
touch screen.
Time Setting
Route Setting
Use the last setting
Photos:
Motion Timelapse
Selfie Portrait
Inception Mode
PAN
TILT
INVL
DWELL
Display icon Mode/Status
Minimum time
setting
Maximum time
setting
PAN (T1) Pan axis rotation period 00:00:00 07:59:59
TILT (T2) Tilt axis rotation period 00:00:00 07:59:59
INVL (t) Photographic interval 00:00:00 00:00:59
DWELL (P) Photography waiting time 00:00:00 00:00:58
PAN: Time required for the pan axis to rotate from the start point to the end
point.
TILT: Time required for the tilt axis to rotate from the start point to the end point.
INVL: The time between the end of the previous shooting and the end of the next
shooting.
DWELL: Gimbal staying time after sending a photographing command for long
exposure.
* T1/T2 > t > P
To Next Page
Loading...
Need help?
General
