Manitou 170 AETJ L - Platform Transport and Working Modes

OPERATING THE PLATFORM
t
IMPORTANT
t
Part 1-INSTRUCTIONS AND SAFETY INSTRUCTIONS must be read and understood before operating the platform.
TRANSPORT/WORKING POSITION
TRANSPORT POSITION
The platform in the transport position when:
- The main arm is completely lowered.
- The secondary arm is completely lowered.
- The telescope is completely retracted.
NOTE: The jib may or may not be raised. The turntable and the basket may or may not be turned. The jib may or may not
be turned (150AETJ3D (150AETJC3D)).
The turntable and the basket are in the neutral position when the main/secondary arms and the basket are parallel to the
platform chassis, with the basket between the 2 rear wheels.
The jib is in neutral position when it is parallel to the main/secondary arms (150AETJ3D (150AETJC3D)).
Driving forward, driving backward, front, rear, left and right are defined as follows:
- The platform is in transport position.
- The turntable and basket are in the neutral position.
- The jib is in neutral position (150AETJ3D (150AETJC3D)).
- The operator is in the basket facing the direction of the front wheels.
The TRANSPORT POSITION speed is the only one available in this position.
WORKING POSITION
The platform is in the working position when the main jib is not completely lowered, when the secondary jib is not completely
lowered or when the telescope is not completely retracted.
NOTE: The jib may or may not be raised. The turntable and the basket may or may not be turned. The jib may or may not
be turned (150AETJ3D (150AETJC3D)).
The WORKING POSITION speed is automatically activated when the platform is in the working position.
DRIVE FORWARD DRIVE BACKWARD
TURN TO THE LEFT
TURN TO THE RIGHT
REAR WHEELSFRONT WHEELS
2 - 48
647536 (26/11/2020) 150 AETJ/AETJ 3D - 150 AETJ C/AETJ C 3D - 170 AETJ L