Manitou 170 AETJ L - Emergency Rescue Operations

RESCUE PROCEDURE
t
IMPORTANT
t
This procedure should be read and fully understood by the operator and any other persons likely to be involved with working on the platform in the event of a breakdown
or someone getting trapped in the basket.
IF THE PLATFORM IS WORKING CORRECTLY
Illustration = second version.
t
IMPORTANT
t
Activate the functions with extreme caution and check for obstructions at all times.
Activate the functions from the ground level control panel when the platform can no
longer be activated from the basket.
- Turn the ignition switch
1
to position .
- Press and hold down the activation button
2
.
- Push and hold the appropriate switch to activate a function.
- Release it or release the activation button to stop the activated function.
IN THE EVENT OF FAILURE OF THE PLATFORM
First version.
t
IMPORTANT
t
The tilt alarm system may no longer be activated and the platform
may tip over.
Activate the functions with extreme caution and check for
obstructions at all times.
t
IMPORTANT
t
Operate the valve knobs carefully to avoid damaging the
hydraulic distributor and the hydraulic block.
Activate the functions using the manual backup
pump when the platform can no longer be
operated from the basket and has a fault:
- Open the right-hand turntable cover.
- Take the pump lever
1
and place it in the
manual backup pump
2
.
- Locate the hydraulic distributor
3
and the
valves
3A
at
3H
.
- Unscrew the appropriate plug
4
.
- Activate functions as described on the
following pages.
NOTE:
e  STICKERS: INSTRUCTIONS FOR
EMERGENCY CONTROLS.
2 - 58
1
2
3A
3B
3C
3D
3E
3F
3G
3H
3
4
2
1
1
3
2
647536 (26/11/2020) 150 AETJ/AETJ 3D - 150 AETJ C/AETJ C 3D - 170 AETJ L