Manitou Mezzer Pro Service Manual

3
MEZZER SERVICE MANUAL
This manual is intended to guide the user through the steps necessary to fully service and maintain
the Mezzer Pro and Mezzer Expert suspension fork.
INTRODUCTION
We highly recommend that service to this fork be performed by a certied bicycle
mechanic. Failure to follow instructions presented in this manual could lead to
serious injury or death. Any questions about the servicing of this fork or the
manual itself should be directed to Hayes Customer Support at:
WARNING
! !
Hayes
Bicycle
USA
5800 W Donges Bay Road Mequon WI 53092
Phone: 888.686.3472
Email: techsupport@hayesbicycle.com
Hayes
Bicycle
Europe
Dirnismaning 20 a 85748 Garching (b. Munich) Germany
Phone: +49 89 203237450
Email: techsupportEU@hayesbicycle.com
Hayes
Bicycle
Asia
16F, No. 37, Sec. 3 Mincyuan E. Rd. Zhongshan District
Taipei City 10476 Taiwan ROC
Phone: 886-2-2518-1108

Manitou Mezzer Pro Specifications

General

Travel	140mm, 150mm, 160mm, 170mm, 180mm
Wheel Size Compatibility	27.5", 29"
Spring Type	Air
Axle	15x110mm Boost
Steerer Tube	1.5" Tapered
Intended Use	Enduro
Adjustments	High Speed Compression, Low Speed Compression, Rebound, Air Pressure
Offset	44mm (27.5"), 51mm (29")