Manitou Mezzer Pro Service Manual

9
MEZZER SERVICE MANUAL
AIR SPRING SERVICE
1
2
3
Mezzer Pro: Remove IRT air cap.
Make sure the air is released from
the fork. Depress IRT Schrader
Valve with a 2mm hex a few times
to ensure all air is released.
Mezzer Expert: Skip to Step 2.
Mezzer Pro: Using a standard
cassette tool and 1” socket loosen
IRT cap until threads are free from
leg.
Mezzer Expert: Using a 24mm
socket loosen IVA cap until threads
are free from leg.
Mezzer Pro: Pull IRT assembly
straight out, Clean with isopropyl,
Inspect seal for damage. If needed
Replace IRT piston seals (141-
36713-K026).
Mezzer Expert: Pull IVA assembly
straight out, Clean with isopropyl,
Inspect seal for damage. If needed
replace IVA piston seals (141-
36713-K026).

Manitou Mezzer Pro Specifications

General

Travel	140mm, 150mm, 160mm, 170mm, 180mm
Wheel Size Compatibility	27.5", 29"
Spring Type	Air
Axle	15x110mm Boost
Steerer Tube	1.5" Tapered
Intended Use	Enduro
Adjustments	High Speed Compression, Low Speed Compression, Rebound, Air Pressure
Offset	44mm (27.5"), 51mm (29")