Manitou MSI 40 - B9 - Mast Greasing; B10 - General Greasing

3 - 16
B10/2
2
B9 - MAST GREASING
Clean and lubricate the following points with grease (See chapter :
LUBRICANTS AND FUEL in paragraph : 3 - MAINTENANCE) and remove
the surplus of grease.
1 - Lubricators of the articulation axles at the foot of the mast 1 (Fig.
B9/1) (2 lubricators).
2 - Lubricators of the foot axles 2 (Fig. B9/2) AND the head axles 3 (Fig.
B9/3) of the tilt cylinders (4 lubricators).
B10 - GENERAL GREASING
Clean and lubricate the following points with grease (See chapter :
LUBRICANTS AND FUEL in paragraph : 3 - MAINTENANCE) and remove
the surplus of grease.
1 - Lubricators of cabin door 1 (Fig. B10/1) (4 lubricators).
Up to machine N° : 116 222
2 - Lubricators of the steering cylinder foot axles 2 (Fig. B10/2) AND the
head axle 3 (Fig. B10/3) (2 lubricator).
3 - Lubricator of steering rod pin 4 (fig. B10/4) (1 lubricator).
4 - Lubricators of cross rods knee-joints 5 (fig. B10/5) and (fig. B10/6)
(4 lubricator).
5 - Lubricators of the swivel pins 6 (Fig. B10/7) (6 lubricators).
6 - Lubricators of the oscillation axle of the hind carriage 7 (Fig. B10/8)
(2 lubricators).
B9/1
B9/2 B9/3
2
3
B10/1
1
1